EPSON Stylus Color 777/777i
10 -
EPSON Stylus Color 777/777i 8/00
Transporting the Printer
If you move your printer some distance, you need to prepare it
for transportation in its original box or one of a similar size.
Follow these steps:
To avoid damage, always leave the ink cartridges
installed when transporting the printer. Be sure to
remove the tape used in step 4 after installing the printer
in its new location.
1. Turn on the printer, wait until the print head locks in the
far right position, then turn off the printer.
2. Unplug the power cord from the electrical outlet. Then
disconnect the printer cable from the printer.
3. Remove any paper from
the printer and remove
the paper support.
4. Open the printer cover.
Secure the ink cartridge
holder to the printer with
tape as shown, then close
the printer cover.
5. Push in the output tray extension and close the tray.
6. Repack the printer and attachments in the original box
using the protective materials that came with it. See the
Start Here sheet.
Be sure to keep the printer level as you transport it. After
transporting the printer, remove the tape securing the print
head and then print a document to test the output.
Related Documentation
TM-SC777 EPSON Stylus Color 777/777i Service
Manual
PL-SC777 EPSON Stylus Color 777/777i Parts Price
List
CPD-10839 EPSON Stylus Color 777/777i Printer
Basics
CPD-10841 EPSON Stylus Color 777/777i Start Here
CPD-10842 EPSON Stylus Color 777/777i CD-ROM
Tape the ink cartridge
holder to the printer case
