2. Specifications
4 OP1 Rev.1a
2. Specifications
2.1 Specification Tables
2.1.1 Electrical Specifications
Item Specifications
Rated voltage DC 24 V
Voltage range DC 21.6 to 26.4 V
Power consumption 7 W or less
Dielectric strength AC 500 V 20 mA per minute (across charger and FG terminals)
Insulation resistance 500 VDC 20 MΩ or more (across charger and FG terminals)
2.1.2 Environmental Specifications
Item Specifications
Ambient temperature
(in panel and at sides of
display screen)
5 to 40 deg C (with minimal variation)
Storage ambient
temperature
−25 to 55 deg C
Operating ambient
humidity
20 to 80% (no condensation)
Storage ambient
humidity
20 to 80% (no condensation)
Dust 0.1 mg/m
3
or less (no conductive dust)
Contamination level 2
Corrosive gasses Free of corrosive gasses
Air pressure resistance
(operation altitude)
800 to 1114 hPa (Max. 2000 m)
Noise resistance 1 kV (EN61000-4-4)
Electrostatic discharge
immunity
4 kV (EN61000-4-2 level 2)
2.1.3 Appearance Specifications
Item Specifications
Protective structure* JEM1030 IP65 or equivalent NEMA#250 TYPE4X/12
External dimensions
W215 mm × H155 mm × D46 mm (excluding connector hood)
Weight
Approx. 800 g (Including Bypass Plug. Excluding the cable.）
Cooling method Air-cooling without blower
* The protective structure is for the front part when the Operator Panel is installed. Though
conformity has been confirmed under applicable testing conditions, use under all
environments is not guaranteed. Before you start to use the Operator Panel, confirm use
in the operating environment. Also, gasket that is used for long periods of time or once
has been installed on the panel is scratched or dirty, and may cause lose sufficient
protection performance. To ensure consistent protection performance, replace the gasket
periodically.
