27
Setting Up the Printer On a Network | 27
3. Make sure Stylus Pro 4880 or EPSON Stylus Pro 4880 is selected,
then click the
Firmware Updater button. You see the Firmware
Updater window.
4. Make sure your printer is on, its LCD is set to
READY, and it is
connected to your computer, then choose
Stylus Pro 4880 or EPSON
Stylus Pro 4880
in the Printer list.
5. Click
Browse and find the firmware that you just downloaded and
extracted. Select the file and click
Choose.
6. If the firmware version of the file is newer, click
Update to start the
firmware updating process. (If it is the same, you don’t need to update.)
7. When the update is complete, close the Firmware Updater window, LFP
Remote window, and the Printer Utility window.
To finish the installation, you need to load some cut-sheet paper and align
the print head, as described on page 102.
Caution: Don’t turn off
the printer while the
firmware is updating.
