A SERVICE OF

logo

Open as PDF
next previous
Testing the Printer
WARNING:
Never run
the
self test using paper that is
narrower than 8ΒΌ inches (210 mm or A4 size) because
then the print head prints directly onto the platen.
5.
Press
the AUTO LOAD
button once to automatically load the
paper.
Note: If the platen turns without loading the paper, remove the
paper and re-insert it more firmly; then press the
AUTO LOAD
button again.
Running the self test
The self test can be run in draft mode or Letter Quality mode.
Follow the steps below:
1.
Be sure you have loaded a sheet of paper, as described above.
2. Turn off the printer.
1-16
Setting Up
the
Printer