A SERVICE OF

logo

6.
The program will then ask you to choose the
drive and directory you want
PowerRlP
to be
installed on. The default is
C:\PowerRIP.
You
may leave the default directory or change it if
desired and then click
NEXT.
Note:
If you choose not to install
PowerRlP
at
this time, click
CANCEL
to stop the installation.
7.
The program continues installing, asking you for
Disk
2,
then Disk
3,
and finally Disk
4.
Click on
OK
after inserting each disk. (If you are not
loading from the drive displayed, you need to
enter a new path before selecting OK.)
Birmy
Graphics Corporation
7