Testing the Printer
WARNING: Before turning on the printer, be absolutely
sure you have removed all protective materials. Turning
on the printer while the print head cannot move may
seriously damage the mechanism.
11.
While
holding
down
the
LINE
FEED button (for draft mode) or
the FORM FEED button (for
NLQ
mode), turn on the printer. The
POWER
and
PAPER OUT lights come on. Also,
either
the front
rear tractor arrow
on
the PAPER SELECT indicate lights up.
or
Notes:
l
When
NLQ
mode is selected using DIP switch l-5, the self
test runs in the NLQ mode even if you press the
LINE
FEED
button.
l
If you open the top cover while the
DFX
is printing, the printer
beeps four times, goes off line, and stops printing. To resume
printing, close the top cover and press the ON LINE button.
1-20
setting up the Printer
