
54
If this unit is not functioning normally, check the following notes before requesting repairs. However, if the unit fails to
improve, contact your dealer for advice.
At these times Check here.
Reference
page
Power does not turn on • Is the main power switch in the on position? s page 13
• Disconnect and reconnect the power cable. s page 13
• Is the projector cooling down ? s page 53
• If the indicator goes on and off when you touch the power cable, turn
off the main power switch then disconnect and reconnect the power
cable. If the unit fails to improve, it is possible that the power cable
has been damaged. Stop using the projector, disconnect the power
cable from the electrical outlet, and contact your dealer.
s page 65
No images appear • Is the Image Off indicator lit orange ? s page 23
• You cannot play DVD videos if the disc region code does not
correspond to the region code label on the side of this unit.
s page 7
• Press to switch to DVD.
s page 38
• Is the lamp spent? s page 52
Images are fuzzy or out of
focus
• Has the focus been adjusted ? s page 15
• Is the lens cover in place ? s page 13
• Is the projector at the correct distance? s page 60
• Could there be condensation ? s page 5
Images appear dark • Is the color mode appropriate to the usage environment ? s page 19
• Is the lamp due for replacement? s page 57
• Is the screensaver running ? s page 44
The remote control does not
work
• Is the Function/Numerics toggle switch in the [1 2 3] (numerical
input) position ?
s page 21
• Depending on the disc, certain operations are prohibited. -
• Are the batteries dead, or have the batteries been inserted correctly? s page 11
No sound can be heard or
the sound is faint.
• Has the volume been adjusted to the minimum setting? s page 15
• Is mute mode active? Press .
-
• Is the DVD level setting set to "DVD LEVEL 1" ? s page 42
The audio distorts Is the volume too loud ?
s page 15
The audio/subtitle language
cannot be changed
If multiple languages are not recorded on the disc, they cannot be
changed.
-
Subtitles do not appear • If there are no subtitles on the disc, they are not displayed. -
• Is the subtitle language set to "OFF" ? s page 33
• When using A-B repeat, subtitles may not be displayed before and
after point A and point B.
-
When the indicators provide no help