Basic menu
Submenu Function
Projector Name
Displays the projector name used to identify the projector when
connected to a network.
When editing, you can enter up to 16 single-byte alphanumeric
characters. The following characters cannot be used: " * + , / ; < =
> ?[ \ ] ` |
Web Control
Password
Set a password to use when making settings and controlling the
projector using Web Control. You can enter up to eight single-
byte alphanumeric characters (* cannot be used). Web Control is
a computer function that allows you to set up and control the
projector by using the Web browser on a computer connected on
a network.
s "Changing Settings Using a Web Browser (Web Control)"
p.72
Projector Key‐
word
When set to On, you have to enter the keyword when you try to
connect the projector to a computer via a network. As a result,
you can prevent presentations from being interrupted by
connections from other computers.
Normally this should be set to On.
Submenu Function
Display LAN Info.
Set the display format for the projector's network information.
When a QR code is displayed, you can connect to the network by
simply reading the QR code with Epson iProjection. The default
value is Text & QR Code.
s "Projecting Using a QR Code" p.55
Wireless LAN menu
Submenu Function
Connection
Mode
Set the connection mode to use when connecting the projector
and a computer via a wireless LAN.
If you select Quick, a small network is created automatically by
the projector and computer. It is used with EasyMP Network
Projection. If SSID Auto Setting is set to On, the projector
becomes an easy access point; if it is set to Off, the network is
created in
Ad hoc mode
g
.
If you select Advanced, the connection is established in
Infrastructure mode
g
through the access point installed.
List of Functions
89
