A SERVICE OF

logo

The remote control uses two AA manganese or alkaline batteries. Replace
the batteries as soon as they run out.
Attention
Make sure you read the Safety Instructions before handling the batteries.
a
Open the battery cover as shown.
b
Remove the old batteries.
c
Insert the batteries with the + and ends facing as shown.
Warning
Check the positions of the (+) and (–) marks inside the battery holder to
ensure the batteries are inserted the correct way. If the batteries are not
used correctly, they could explode or leak causing a fire, injury, or
damage to the product.
d
Close the battery cover and press it down until it clicks into
place.
Related Links
"Maintaining the Projector" p.157
Replacing the Remote Control Batteries
167