A SERVICE OF

logo

4
L
R4C621
Rev. C
A5 size Daily_Uk.fm
11/30/00 Pass 0
Proof Sign-off:
A.Nagasawa CRE S.Tsukada
N. Nomoto
editor name
The power cord or plug is damaged; liquid has entered the
printer; the printer has been dropped or the case damaged;
the printer does not operate normally or exhibits a distinct
change in performance.
If you plan to use the printer in Germany, the building
installation must be protected by a 10 or 16 amp circuit
breaker to provide adequate short-circuit protection and
over-current protection for this printer.
A Few Precautions
Take note of the following when using the printer, handling the
ink cartridges, or choosing a location for the printer.
When using the printer
Observe the following:
Do not put your hand inside the printer or touch the ink
cartridges during printing.
Do not move the print head by hand; otherwise, you may
damage the printer.
Remove your printouts from the output tray shortly after
printing ; otherwise, the output tray may wrap.
Always turn the printer off using the
2
power button. When
this button is pressed, the
2
power light flashes briefly and
then goes out. Do not unplug the printer or turn off the power
to the outlet until the
2
power light stops flashing.
Before transporting the printer, make sure that the print head
is in the home (far right) position and the ink cartridges are
in place.