A SERVICE OF

logo

Spill-Proof Cuts Thermal Printer
Owner’s Manual
1.7 Troubleshooting the Printer
The printer is simple and generally trouble-free, but from time to time minor problems
may occur. Follow these procedures to determine the cause and resolution of any
problems the printer may be having. If the procedures in this section do not correct the
problem, contact a service representative.
Printer LED
Condition LED Status
Unit ready ON
Unit is in Reset or Booting OFF
Unit in standby (powered off)
OFF
Paper Out Slow Blink
Door Open Fast Blink
Paper Jam Fast Blink
Missing Black Index Mark Fast Blink
Temperature Error Med Blink
Voltage Error Med Blink
Print Head Error Med Blink
Table 2: Troubleshooting with the status LED
Status LED
Figure 8: Status LED
103494
Aug. 2006
8