Getting Started
1-10
1.8 Installing the Black Ribbon Cassette
Note: (only for printer CI - 4050) Information about installing the 4-colour-
ribbon cassette you will find in chapter 6 Colour option.
It is recommended to use only original ribbon put out by our company. Using
other ribbons will void your warranty.
Caution: Never manually move the print head fully to the right hand stop (you
could change the way of the paper output).
Note: If the printer is busy (message BUSY 1 ELQ) always press
before opening the top cover.
1. Switch the printer ON at the power switch; Power LED is lit and wait for the
message READY 1 ELQ or INSTALL RIBBON.
2. If the printer is busy (message BUSY 1 ELQ) press .
3. Lift the top cover to gain access to the ribbon cassette mountings. The print
head will move to the correct position, aligned with the cut-out in the paper
guide plate to facilitate the installation of the ribbon cassette.
