A SERVICE OF

logo

Sawgrass Technologies, Inc. ChromaBlast
Getting Started Guide for the EPSON Stylus C88 /C88 +
21
Tips:
Perform a nozzle check from The
ChromaBlast Driver. A few cleanings may
be necessary to get a good nozzle check.
Make sure you install ChromaBlast Driver™ from the CD that
came with your Quick Connect II system. Refer to the
ChromaBlast Driver™ documentation and video tutorial on
how to use it.
You may want to remove the printer lid or leave it open at all
times.
You may have a little air in your lines but this will clear after a
few prints.
If you are going to leave your system without using it for
several days you should clamp your lines with the tube
clamps.
Do not raise the ink box higher than the printer