Settings for Windows 2000/NT
6-20
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting
Refresh
from the View
menu.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
network adapter, you must wait until the on-screen message
appears before turning off your printer.
Configuring for IPP using EpsonNet WebAssist
You can also configure the network adapter for IPP using
EpsonNet WebAssist.
Note:
❏
A web browser must be installed in your computer.
❏
TCP/IP must be correctly set for the computer and network adapter.
❏
Do not operate EpsonNet WinAssist and EpsonNet WebAssist for
the printer at the same time.
❏
There are some restrictions on the characters you can use depending
on your browser. For details, see your browser or OS manual.
