The EL-Skyport Transmitter triggers the EL-Skyport Receiver modules in the following modes:
1. Off Unit is OFF, no function.
2. Select Group - Group (1 to 4).
Set switch to Group. and select Group 1 to 4.
All corresponding EL-Skyport Receivers with the same selected Group (1 to 4) are
triggered.
3. ALL Mode switch is set to ALL.
All corresponding EL-Skyport Receivers are triggered regardless of which Group is se-
lected.
Integrated Hot-Shoe SYNC 2.5 mm Socket
Use the included Sync cable to connect the integrated 2.5 mm Mono Jack socket with the
camera or lens PC socket directly.
EL-Skyport Transmitter SPEED RX Features
Compatible with Ranger RX, Style RX, Digital RX, BXRi 250 / 500, Ranger Quadra AS!
If the EL-Skyport Transmitter SPEED is used with the EL-Skyport Transceiver RX, BXRi 250
/ 500 or the Ranger Quadra AS,
the following EXTRA
features are available:
Depending upon which Group is selected, the following RX-unit settings can be modied:
1. Flash power increase in 1/10 f-stops.
press push button + to increase the power of selected Group of (or ALL) RX-units in
1/10 f-stops.
2. Flash power decrease in 1/10 f-stops.
press push button - to reduce the power of selected Group of (or ALL) RX-units in 1/10
f-stops.
3. Modelling lamp toggle.
press and hold the push button +, 2 seconds or longer before releasing,
to toggle modelling lamp of the selected Group of (or ALL) RX-units.
6
