39
Pyrolytic cleaning
1 Warning: The oven gets very hot during this process. Keep small chil-
dren away.
1 Important: Before carrying out the pyrolytic cleaning process all re-
movable parts, with the exception of the side rails, must be removed
from the oven.
3 If you use the oven shelf runners that are available as special accesso-
ries, these must be removed before pyrolytic cleaning.
If there are still oven shelf runners in the oven, ’C1’ will appear in the
time display.
The pyrolysis process then cannot be started due to a safety cut-out
that protects the oven shelf runners.
Pyrolysis
1.First remove the worst of the residue manually.
2.Select oven function Pyroluxe .
– “3:15“ appears in the time display,
– Continuously flashes for approximately 5 seconds.
Pyrolytic cleaning then starts.
3 The Light does not work.
When the temperature set is reached, the door is locked.
The bars of the heat indicator are illuminated until the door is unlocked
again.
Changing the length of the Pyroluxe
1.Proceed as described in the section Pyroluxe
2.While Cook time is flashing select the desired length of the pyroluxe
using or :
“2:15“or ”3:15”.
Cook time flashes for approximately 5 seconds.
Pyrolytic cleaning then starts.
3 If Cook time is no longer flashing, press the Select button again
and then perform the setting procedure.
Changing the Pyroluxe switch-off time
The Pyroluxe switch off time can be changed using the End time
clock function (within 2 minutes of setting the Pyroluxe).
When are the different pyroluxes set:
P2 - 2:15 = Pyroluxe Quick: For a light degree of soiling,
P1 - 3:15 = Pyroluxe Intensive: For a heavy degree of soiling.
