Point the remote control toward the projector
(Receiver window) whenever pressing the
buttons. Maximum operating range for the
remote control is about 16.4’ (5m) and 60°
front and rear of the projector
Connect a remote control cable to R/C jacks located on the wireless/wired
remote control unit and the side of the projector.
To insure safe operation, please observe the following
precautions:
• Use (2) AA type alkaline batteries.
• Change two batteries at the same time.
• Do not use a new battery with a used battery.
• Avoid contact with water.
• Do not drop the remote control unit.
• If batteries have leaked on the remote control,
carefully wipe the case clean and load new batteries.
The remote control unit can be used as wireless or wired remote control.
