1
Press ZOOM A/V button(s) on Top Control or on Remote Control Unit.
The message “Zoom” is displayed.
2 Press ZOOM A button or POINT UP button to make image larger, and press
ZOOM V button or POINT DOWN button to make image smaller.
FOCUS ADJUSTMENT
1 Press FOCUS A/V button(s) on Top Control or on Remote Control Unit. The
message “Focus” is displayed.
2 Adjust focus of the image by pressing FOCUS A/V button(s) or POINT UP/DOWN
button(s).
LENS SHIFT ADJUSTMENT
1 Press LENS SHIFT A/V button(s) on Top Control or LENS SHIFT button on
Remote Control Unit. The message “Lens shift” is displayed.
2 Press LENS SHIFT A button or POINT UP button to move image up, and press
LENS SHIFT V button or POINT DOWN button to move image down. Refer to
P9 for operating range.
KEYSTONE ADJUSTMENT
If image has keystone distortion, correct image with KEYSTONE adjustment
1 Press KEYSTONE button on Remote Control Unit or select
Keystone on SETTING Menu (P36). The message “Keystone” is
displayed.
2 Correct keystone distortion by pressing POINT UP/DOWN button(s). Press
POINT UP button to reduce upper part of the image, and press POINT DOWN
button to reduce lower part of the image. To reset Keystone adjustment, press
NORMAL button.
ZOOM ADJUSTMENT
