24-port NWay Ethernet Switch User’s Guide
102 Web-Based Network Management
The information is described as follows:
♦ Switch Name A user-assigned name for the Switch.
♦ Location A user-assigned description for the physical location of the Switch.
♦ Contact Name of the person to contact should there be any problems or questions with the system. You may
also want to include a phone number or extension.
♦ Description A description of the Switch type.
♦ MAC Address The Ethernet address for the device.
♦ PROM version Version number for the firmware chip. This information is needed for new runtime software
downloads.
♦ Firmware version Version number of the firmware installed on the Switch. This can be updated by using the
Update Firmware window in the Reset and Update section.
♦ Hardware version Version number of the Switch’s hardware.
♦ Slot 1 Description of module plugged into slot 1, located on the front-of the Switch.
♦ Slot 2 Description of module plugged into slot 2, located on the rear of the Switch.
Advanced
Figure 7-5. Switch Settings - Advanced window
