1122
© 2004 Directed Electronics, Inc
ESP FEATURES AND CONTROLS
The ability to access the feature settings
of your amplifier is only possible with
the use of a Directed Electronics
Bitwriter
®
unit. Firmware version 1.8 or
later is required in the Bitwriter
®
.
Versions prior to 1.8 will not program
the amplifier.
MAIN FEATURES
1.
TTuurrnn--oonn ddeellaayy --
0.75, 1.00, 1.25,
1.75, 2.25, 2.75, or 3.25 seconds
is selectable.
22..7755
seconds is the
factory default setting.
2.
AAnnttii--tthheefftt --
On/Off/Reset Anti-Theft
Trigger. Selecting ON places the unit
in the alarm monitoring (amplifier
disable on loss of 12V) condition.
Off disables alarm monitoring.
Reset Anti-Theft Trigger allows the
amplifier to be unlocked from the
loss of 12V.
OOffff
is the factory
default setting.
To unlock the amplifier, use the
following procedure:
AA..
Plug the Bitwriter
®
into one of
the ESP ports and turn the
Bitwriter
®
ON.
BB..
Select
AAnnttii--TThheefftt
from the menu.
ii..
Select
AAnnttii--TThheefftt RReesseett
from
the submenu.
iiii..
Press
WWrriittee
twice.
CC..
Select
AAnnttii--TThheefftt
from the menu
again.
ii..
Select
OOffff
from the submenu.
iiii..
Press
WWrriittee
twice.
A
“
WWrriittiinngg SSuucccceessssffuull
”
message
will appear on the Bitwriter
®
display if the procedure was
successful.
3.
VVaalleett mmoonniittoorriinngg --
Enable/Disabled
DDiissaabblleedd
is the factory default
setting. The amplifier will not power
up if the alarm system is in Valet.
4.
IInnppuutt ggaaiinn aaddjjuussttmmeenntt -- UUnnlloocckk
is
the factory default setting.
Lock/Unlock, in the lock position
the gain adjustment located on the
top panel is software locked at the
input gain range that is selected.
5.
IInnppuutt ggaaiinn rraannggee --
0.25–0.50,
0.50–1.25, 1.25–3.00, or
3.00–6.00 V, and
00..2200––88..0000VV
(factory default). This limits the
gain adjustment to the specified
range.
6.
FFaann CCoonnttrrooll --
On/Auto/Off
This controls an external fan
connected to the fan port.
