Dell S1909WN Manual

A SERVICE OF

next previous



OSD Warning Messages



Factory Reset

ResetallOSDsettingstothefactorypresetvalues.

When the monitor does not support a particular resolution mode you will see the following message:



This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the

HorizontalandVerticalfrequencyrangesaddressablebythismonitor.Recommendedmodeis1366 x 768.



YouwillseethefollowingmessagebeforetheDDC/CIfunctionisdisabled.



WhenmonitorentersPowerSavemode,thefollowingmessageappears:

Activate the computer and wake up the monitor to gain access to the OSD





If you press any button other than the power button one of the following messages will appear :



If VGA cables are not connected, a floating dialog box as shown below appears.