Dell
22
PowerEdge R210 II Technical Guide
Hardware configurations affect system noise levels: Dell‘s thermal control provides for
cooling flexible to varying hardware configurations. Acoustical performance associated with
two common configurations is listed in Table 6.
Noise ramp and descent at boot: Fan speeds (and corresponding noise levels) ramp up during
the boot process to add a layer of protection for component cooling, in the event that the
system does not boot properly.
The acoustical performance for minimum and typical configurations of the PowerEdge R210 II are
shown in Table 6.
Table 6. Acoustical Specifications
Minimum Configuration @ 23°C Ambient
Intel
®
Core
TM
i3-2100
(65W)
1 x 3.5‖
SATA (7.2k)
250GB
Typical Configuration @ 23°C Ambient
Intel
®
Xeon
®
E3-1200
product
family
(80W)
2 x 3.5‖
SATA (7.2k)
500GB
Definitions
Standby: AC Power is connected to power supplies but the system is not turned on.
Idle: Reference ISO7779 (1999) definition 3.1.7; system is running in its OS but no other specific
activity.
Active Hard Drives: An operating mode per ISO7779 (1999) definition 3.1.6; Section C.9 of ECMA-74
9th ed. (2005) is followed in exercising the hard disk drives.
Stressed Processor: An operating mode per ISO7779 (1999) definition 3.1.6; SPECPower set to 50%
loading is used.
LwA–UL: The upper limit sound power level (LwA) calculated per section 4.4.2 of ISO 9296 (1988) and
measured in accordance to ISO 7779 (1999).
