IP Addressing Commands 165
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Examples
The following example defines a default domain name of www.dell.com.
ip name-server
The
ip name-server
Global Configuration mode command sets the available name servers. To
remove a name server, use the
no
form of this command.
Syntax
ip name-server
server-address
[
server-address2 … server-address8
]
no ip name-server
[
server-address1 … server-address8
]
•
server-address—
IP addresses of the name server. Up to 8 servers can be defined in one
command or by using multiple commands.
Default Configuration
No name server addresses are specified.
Command Mode
Global Configuration mode
User Guidelines
• The preference of the servers is determined by the order they were entered.
• Up to 8 servers can be defined.
Examples
The following example sets the available name server.
ip host
The
ip host
Global Configuration mode command defines a static host name-to-address mapping
in the host cache. To
remove the name-to-address mapping, use the
no
form of this command.
Console (config)# ip domain-name www.dell.com
Console (config)# ip name-server 176.16.1.18
