Alpha SRM Console Firmware 7–9
Basic Alpha SRM Console Command Descriptions
<data>
The data to be deposited.
Options
-
The location immediately preceding the last location referenced by
examine or deposit.
*
The location last referenced by examine or deposit.
@
The location addressed by the last location referenced by examine or
deposit.
deposit Command Option Description
-b
Specifies data type is byte.
-w
Specifies data type is word.
-l
Specifies data type is longword.
-q
Specifies data type is quadword.
-o
Specifies data type is octaword.
-h
Specifies data type is hexword.
-physical
References physical address space.
-virtual
References virtual address space.
-gpr
References general-purpose register address space.
-fpr
References floating-point register address space.
-ipr
References internal processor register address space.
-n <count>
Specifies the number of consecutive locations to
examine.
-s <step>
Specifies the address increment as a hexadecimal value.
This option allows you to override the increment that is
normally derived from the data size.
Symbolic
Address Description
