© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 13 of 18
SDM TCAM Resources 2960-XR Default (IP Lite) 2960-XR
VLAN (IP Lite)
2960-XR
IPv4 (IP Lite)
IPv4 QoS ACEs 500 500 500
IPv6 QoS ACEs 250 500 0
IPv4 security ACEs 1K 1K 875
IPv6 security ACEs 500 500 0
Q. Does the Cisco Catalyst 2960-X Series support IPv6?
A. Yes. Cisco Catalyst 2960-XSeries Switches are IPv6 certified.
These switches with LAN Base software support:
●
IPv6 host
●
IPv6 management
●
IPv6 static routing
●
IPv6 MLD v1 and v2 snooping
●
IPv6 port-based ACLs
●
IPv6 router ACLs
●
IPv6 QoS
●
IPv6 First Hop Security (RA guard, source guard, and binding integrity guard).
In addition, 2960-XR switches with IP Lite software support:
●
IPv6 RIP
●
OSPFv3 stub
●
DHCPv6
●
HSRPv6
●
IPv6 first hop security source guard
Q. How can I manage the Cisco Catalyst 2960-X Series Switch with IPv6?
A. The Cisco Catalyst 2960-X Series supports the IPv6 host feature. An IPv6 address can be assigned to a
VLAN interface either statically or using DHCP. The following IPv6 management protocols are supported:
●
HTTP, HTTP(s) over IPv6
●
SNMP over IPv6
●
Syslog over IPv6
●
DHCP-based auto config (Auto Install) and image download
●
Telnet and SSH
