SNMP Commands
show snmp
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 354
26
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address Type Community Version UDP Filter TO Retries
Port Name Sec
-------------- ----- --------- ------- ---- ------ --- -------
192.122.173.42 Trap Public 2 162 15 3
192.122.173.42 Inform Public 2 162 15 3
Version 3 Notifications
Target Address Type Username Security UDP Filter TO Retries
Level Port Name Sec
-------------- ----- ---------------- ---- ------ --- -------
192.122.173.42 Inform Bob Priv 162 15 3
System Contact: Robert
System Location: Marketing
The following table describes the significant fields shown in the display.
Field Description
Community-string Community access string to permit access to the
SNMP protocol.
Community-
access
Type of access - read-only, read-write, super
access
IP Address Management station IP Address.
Trap-Rec-Address Targeted Recipient
Trap-Rec-
Community
Statistics sent with the notification operation.
Version SNMP version for the sent trap 1 or 2.
