2-24
Cisco SFS 7024 Hardware Users Guide
OL-8794-02
Chapter
–
Spine 5: 192.168.0.13
–
Spine 6: 192.168.0.14
It is necessary for each managed spine to have a unique IP address for the following reasons:
• Unique IP addresses are used when sending syslog messages from a managed spine to a syslog
server.
• Gives the user the ability to ping each management spine separately.
• If the IP addresses are not unique, collisions will occur, causing IP operations to fail.
To update the IP address on managed spine, do the following:
Step 1 Ensure that the spine module is connected to a COM port on a serial terminal device via the RS-232 port.
Step 2 Get to a [boot]: prompt by following Step a or b.
a. If the managed spine is running, enter the following command at the console:
reboot
Then press Enter.
b. If the managed spine is not running, power on the switch.
Step 3 After selecting image1 or image2, press the Spacebar to interrupt the auto load sequence before the
counter expires (within 5 seconds).
Step 4 At the [boot]: prompt enter the new spine IP address with the following syntax:
spineip <NEW IP ADDRESS>
Then press Enter.
Step 5 At the [boot]: prompt, enter reboot, and press Enter. Upon reboot the managed spine will display
information similar to the following:
Unified Boot Manager For The T3 Platform.
Image Date: Jan 19 2006, 15:03:31
Checking L2 functionality...
BCM1125
L2 caches initialized and invalidated
CPU0 caches initialized
Initialized SMBUS Channels
SPD Checksum ok.
MEM_SEL = 0x00000007
CPU_REV = 0x00000001_112421FF
CPU speed = 400 MHz
IO Bridge 0,1 speed = 133, 200 MHz
Memory size = 128 MB
MC1 Configured for 128M SODIMM, CAS=2, 100 MHz
Configured Memory Size = 0x08000000
Channel Interleave Bit = 0
Number of Mem Channels = 1
Testing memory
Memory tests pass
CPU0 flushing caches
L2 flush complete
Start type = 0xBFC006A0
Jumping to romStart
Initializing HyperTransport bus
HyperTransport initialization completed
rintf MBOX connect interrupt_source=28 vector=62 status=0
Printf MBOX intEnable status=0
Found Intel Strata Flash 128 MBit (0x8918).
Mounted raw file system on device /image1. (size=6291456 bytes)
Mounted raw file system on device /image2. (size=6291456 bytes)
