A-3
Cisco ME 3400 Ethernet Access Switch Hardware Installation Guide
OL-7677-04
Appendix A Connector and Cable Specifications
Connector Specifications
SFP Module Ports
The Cisco ME switch uses SFP modules for fiber-optic and copper uplinks. See the Cisco ME switch
release notes for a list of supported SFP modules.
Figure A-2 Fiber-Optic SFP Module LC Connector
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments.
Statement 1051
Dual-Purpose Ports
The Cisco ME 3400G-12CS 10/100/1000 Ethernet ports on the dual-purpose ports use standard RJ-45
connectors. Figure A-3 shows the pinouts.
Figure A-3 10/100/1000 Port Pinouts
Console Port
The console port uses an 8-pin RJ-45 connector, which is described in Table A-2 and Table A-3. If you
did not order a console cable with your switch, you need to provide an RJ-45-to-DB-9 adapter cable to
connect the console port of the switch to a console PC. You need to provide a RJ-45-to-DB-25 female
DTE adapter if you want to connect the switch console port to a terminal. You can order a kit (part
number ACS-DSBUASYN=) containing that adapter from Cisco. For console port and adapter pinout
information, see Table A-2 and Table A-3.
58476
60915
231 45678Pin Label
1
2
3
4
5
6
7
8
TP0+
TP0-
TP1+
TP2+
TP2-
TP1-
TP3+
TP3-
