D14850.02 MX Series Administrator Guide (TC5.0) | 2011 NOVEMBER | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com
63
Cisco TelePresence MX Series
ADMINISTRATOR GUIDE
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Will use the a RateAdaption algorithm adapted to the PacketLossResilience mechanism. Default
value is On.
ADMIN
<On/Off>
On: RateAdaption will be used as part of the PacketLossResilience mechanism.
Off: RateAdaption will NOT be used as part of the PacketLossResilience mechanism.
Experimental Conference 1 PacketLossResilience RateAdaption: On
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
ADMIN
<On/Off>
Experimental Conference 1 ReceiverBasedDownspeeding: Off
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
ADMIN
<On/Off>
Experimental NetworkServices UPnP Mode: Off
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
ADMIN
<0..3600>
Experimental NetworkServices UPnP Timeout: 0
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
This configuration tells whether CTMS (Cisco TelePresence Multipoint Switch) is supported or
not.
ADMIN
<Off/On>
Off: CTMS is not supported.
On: CTMS is supported.
Experimental CTMSSupport Mode: On
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
ADMIN
<Off/CallRate2256/CallRate768/ReduceTo576p/ReduceTo360p/
Unencrypted/Disconnect>
Experimental PacketOverloadHandling WhenDetected: Off
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
ADMIN
<Indicators/Full>
Experimental SystemUnit MenuType: Full
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
ADMIN
<On/Off>
Experimental SystemUnit SoftwareUpgrade RequireAuthentication:
Off
