A SERVICE OF

logo

Open as PDF
next previous
www.cisco.com
45
Cisco TelePresence System Prole-series, C-series codecs, Quick Set C20 User guide
D14852.03 User guide Cisco TelePresence Prole, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
The Advanced conguration settings are aimed at system administrators only and may
have been password protected by your system administrator. Unless you are the system
administrator you should normally leave these settings as they are.
The IP settings (not shown) are also aimed at system administrators.
The Advanced conguration settings and the IP settings are described in the Administrator
Guide applying to your video system. This guide can be downloaded from www.cisco.com/
go/telepresence/docs.
The password may not have been set. If you decide to give your system a password, take
care. If you forget your password contact your Cisco representative for help.
Entering the Administrator settings
Administrator settings & password
About the Administrator settings
The Administrator settings lets you dene extra softbutton functions; change the IP
settings of the system; use the advanced conguration options and change the menu
access password.
Your video system can be congured through its web interface, but it may also be
congured through the Advanced conguration. This is all normally done by your
system administrator, who may have password protected the access to the Advanced
conguration.
Call
Meetings
Presentation
Camera control
Settings
HOME
Layout
Main source: Camera
Call settings
Language: English
Date and time
Sounds and alerts
Wallpaper: Growing
System information
Administrator settings
Restart
SETTINGS
Then navigate to Administrator settings
and press the key again to display the
options available.
Starting from the Home menu,
navigate down to Settings and
press the key.
Enter the password. Invoke the virtual keyboard, if
needed (see “Placing calls by specifying the name,
number or address” on page 24 for details on this).
Navigate to OK to enter the Administrator settings menu.
Call
Meetings
Presentation
Camera control
Settings
HOME
Call
Meetings
Presentation
Camera control
Settings
HOME
Layout
Main source: Camera
Call settings
Language: English
Date and time
Sounds and alerts
Wallpaper: Growing
System information
Advanced
Restart
SETTINGS
Please enter your
Administrator password:
ADMINISTRATOR PASSWORD
***
OK
Cancel
Contents
Advanced settings
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings