19-14
Cisco Security Appliance Command Line Configuration Guide
OL-8629-01
Chapter 19 Managing the AIP SSM and CSC SSM
Transferring an Image onto an SSM
hostname# show module 1
Mod Card Type Model Serial No.
--- -------------------------------------------- ------------------ -----------
1 ASA 5500 Series Security Services Module-20 ASA-SSM-20 JAB100301NE
Mod MAC Address Range Hw Version Fw Version Sw Version
--- --------------------------------- ------------ ------------ ---------------
1 0015.c6fa.2c0f to 0015.c6fa.2c0f 1.0 1.0(10)0 CSC SSM 6.0 (Build#1349)
Mod SSM Application Name Status SSM Application Version
--- ------------------------------ ---------------- --------------------------
1 CSC SSM Down 6.0 (Build#1349)
Mod Status Data Plane Status Compatibility
--- ------------------ --------------------- -------------
1 Up Up
The argument 1, at the end of the command, is the slot number occupied by the SSM. If you do not know
the slot number, you can omit it and see information about all modules, including the adaptive security
appliance, which is considered to occupy slot 0 (zero).
Use the details keyword to view additional information for the SSM.
The follow example output is from an adaptive security appliance with a CSC SSM installed.
hostname# show module 1 details
Getting details from the Service Module, please wait...
ASA 5500 Series Security Services Module-20
Model: ASA-SSM-20
Hardware version: 1.0
Serial Number: JAB100301NE
Firmware version: 1.0(10)0
Software version: CSC SSM 6.0 (Build#1349)
MAC Address Range: 0015.c6fa.2c0f to 0015.c6fa.2c0f
App. name: CSC SSM
App. Status: Up
App. Status Desc: CSC SSM scan services are available
App. version: 6.0 (Build#1349)
Data plane Status: Up
Status: Up
HTTP Service: Up
Mail Service: Up
FTP Service: Up
Activated: Yes
Mgmt IP addr: 10.23.62.92
Mgmt web port: 8443
Peer IP addr: <not enabled>
Transferring an Image onto an SSM
For an intelligent SSM, such as AIP SSM or CSC SSM, you can transfer application images from a TFTP
server to the SSM. This process supports upgrade images and maintenance images.
Note If you are upgrading the application on the SSM, the SSM application may support backup of its
configuration. If you do not back up the configuration of the SSM application, it is lost when you transfer
an image onto the SSM. For more information about how your SSM supports backups, see the
documentation for your SSM.
