© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 9 of 15
Power Supply 1300W AC 2800W AC 1400W DC-P 4200W AC 2500W AC
Input current (rated) 16A @ 100 VAC,
7A @ 240 VAC
16A @ 200 VAC Data: 31A @ -60VDC
Inline: 180A @ -48VDC
2x 12A @ 100 VAC
or
2x 12A @ 200 VAC
15A @ 200VAC
Output current (data) 12V @ 84.7A
3.3V @ 12.5A
12V @ 113.3A
3.3V @ 12.1A
12V @ 120A
3.3V @ 10A
12V @ 115.3A
3.3V @ 12.5A
-
Output current (PoE) -50V @ 16.7A -50V @ 28A -50V @ 140A -50V @ 77.1A (200V)
-50V @ 38A (100V)
-50V @ 50A
Output power
redundant mode (data)
1000W + 40W 1360W + 40W 1367W + 40W 1360W + 40W -
Output power
redundant mode (PoE)
800W 1400W 7500W 3700W (200V)
1850W (100V)
2500W (per unit)
Output power
combined mode (data)
1667W 2473W 2267W 2766W -
Output power
combined mode (PoE)
1333W 2333W 7280W 7600W (200 V)**
3782W (100 V)
-
Heat dissipation* 1568 BTU/hr 2387 BTU/hr 1591 BTU/hr (data)
2905 BTU/hr (data and
PoE)
3580 BTU/hr 1210 BTU/hr
Holdup time 20 ms 20 ms 4 ms 20 ms 20 ms
Number of 802.3af
Class 2 power devices
supported with 1
power supply (1+1)
101 PDs 178 PDs 384 PDs 384 PDs (200V)
175 PDs (100V)
318 PDs
(per unit)
Number of 802.3af
Class 0 and 3 power
devices supported with
1 power supply (1+1)
46 PDs 80 PDs 384 PDs 186 PDs (200V)
79 PDs (100V)
144 PDs
(per unit)
Cisco phones with
Integrated PoE***
113 PDs 198 PDs 384 PDs 384 PDs (200 V)
195 PDs (100 V)
353 PDs
(per unit)
Hot swappable Yes Yes Yes Yes Yes
* Note that calculations for heat dissipation is based on one power supply operating at maximum output power.
** Measured when two AC power shelves are strapped together and contain 3x2500W AC power supplies.
*** Measured when using Cisco prestandard PoE line cards (WS-X4148-RJ45V).
Additional notes for Table 7 and 8:
1. Output power is per power supply, unless otherwise stated.
2. Heat dissipation numbers represent the power-conversion losses of the power supply in operation.
3. The number of power devices supported will depend on customer configuration.
