Contents
xxxiii
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-02
Configuring Policy-Based Routing 38-83
PBR Configuration Guidelines 38-84
Enabling PBR 38-85
Filtering Routing Information 38-87
Setting Passive Interfaces 38-87
Controlling Advertising and Processing in Routing Updates 38-88
Filtering Sources of Routing Information 38-88
Managing Authentication Keys 38-89
Monitoring and Maintaining the IP Network 38-90
CHAPTER
39 Configuring IPv6 Unicast Routing 39-1
Understanding IPv6 39-1
IPv6 Addresses 39-2
Supported IPv6 Unicast Routing Features 39-3
128-Bit Wide Unicast Addresses 39-3
DNS for IPv6 39-4
Path MTU Discovery for IPv6 Unicast 39-4
ICMPv6 39-4
Neighbor Discovery 39-4
IPv6 Stateless Autoconfiguration and Duplicate Address Detection 39-5
IPv6 Applications 39-5
Dual IPv4 and IPv6 Protocol Stacks 39-6
Unsupported IPv6 Unicast Routing Features 39-6
Limitations 39-7
IPv6 and Switch Stacks 39-7
SDM Templates 39-9
Dual IPv4-and IPv6 SDM Templates 39-9
Configuring IPv6 39-10
Default IPv6 Configuration 39-11
Configuring IPv6 Addressing and Enabling IPv6 Routing 39-11
Configuring IPv4 and IPv6 Protocol Stacks 39-13
Configuring IPv6 ICMP Rate Limiting 39-15
Configuring CEF and dCEF for IPv6 39-15
Configuring Static Routing for IPv6 39-16
Configuring RIP for IPv6 39-18
Configuring OSPF for IPv6 39-20
Displaying IPv6 39-22
