B-2
Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
OL-24281-01
Appendix B Specifications
Focus Automatic with manual override
Maximum Sensitivity at 35
IRE
• NTSC/EIA:
–
0.55 lux at 1/60 sec (color)
–
0.018 lux at 1/2 sec (color)
–
0.00018 lux at 1/2 sec (b/w)
• PAL/CCIR:
–
0.45 lux at 1/50 sec (color)
–
0.015 lux at 1/1.5 sec (color)
–
0.00015 lux at 1/1.5 sec (b/w)
Sync system Internal/AC line lock, phase adjustable, V-sync
White balance Automatic with manual override
Shutter Speed Automatic (electronic iris)/manual
• NTSC—1/2 ~ 1/30,000
• PAL—1/1.5 ~ 1/30,000
Iris control Automatic, with manual override
Gain control Automatic/OFF
Video output 1 Vp-p, 75 ohms
Video signal-to-noise ratio >50 dB
Wide dynamic range 128X
Electronic image
stabilization
• Day/night (35X zoom) pendant—Integrated/selectable
• Day/night (27X zoom) in-ceiling—Not available
Image enhancement • Day/night (35X zoom) pendant—Integrated/selectable
• Day/night (27X zoom) in-ceiling—Not available
Motion detection Integrated
Electrical
Ports • RJ-45 connector for 100BASE-TX
• Auto MDI/MDI-X, autonegotiate/manual setting
Cabling type Cat5 or better for 100BASE-TX
Input voltage • 18 to 32 VAC; 24 VAC nominal
• 22 to 27 VDC; 24 VDC nominal
Input power • 24 VAC:
–
23 VA nominal (without heater)
–
73 VA nominal (with heater)
• 24 VDC:
–
0.7A nominal (without heater)
–
3A nominal (with heater)
Table B-1 Cisco 2900 Series IP Dome Camera Specifications (continued)
Item Specification
