Page 8 of 20 Intimidator™ Spot LED 250 User Manual Rev. 11
Before mounting the product, read and follow the Safety Notes.
Orientation
The Intimidator™ Spot LED 250
may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
· Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming purposes.
· Make sure that the structure or surface onto which you are mounting the
can support the product’s weight. See the Technical Specifications.
· When mounting the
product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
· When rigging the
product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13-mm hole, which is appropriate for
this purpose.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
· The rubber feet also serve as floor s
upports. When mounting the product on the
floor, make sure that the product and cables are away from people and vehicles.
Mounting Diagram
Safety Loop
Attachment Point
