15
NORMAL PLAYBACK
PLAYBACK
The indicator will light and the VCR will power-up auto-
matically.
• If a tape without a record protect tab is inserted, the unit will
start the playback automatically.
Press REC/PLAY HOURS
EE
or
DD
button to choose the desired
time mode.
The selected time is displayed in the VCR indicator panel.
Select the time while the tape is stopped or being played back.
L6H
➔
L18H
➔
L30H
➔
72H
➔
96H
➔
120H
➔
168H
➔
240H
➔
480H
➔
960H
• The time mode can not be changed while the tape is playing
back in L2H and L4H.
• If the tape reaches the end before STOP is pressed, the VCR
will automatically stop and rewind.
If noise appears on the screen during playback, press either
TRACKING (
DD
/
EE
) buttons until the noise on the screen is
reduced.
• In case of vertical jitter, adjust these controls very carefully.
•Tracking is automatically reset to normal when the tape is
ejected.
TRACKING CONTROL
NORMAL PLAYBACK
1 Insert a prerecorded video cassette.
2 Press the PLAY button.
3 Press the STOP button to stop playback.
PREPARATION
•Turn on the power of both the VCR and the monitor.
• If you have a TV instead of monitor, turn on the power of TV
and then set the TV’s source selector to VIDEO.
NOTES:
•Apicture may vibrate vertically, but this is normal.
•Adistortion may appear on the top of the screen, but this is normal.
•Asound may be muted during playback, but this is normal.
• If the recording hour and playback hour are different, the sound may not play back normally.
(Set the AUDIO PLAY on the SETUP menu to OFF mode.)
