71
Assigning a Name to a Data Projector
You can use Web Setup to assign a unique name to each Data Projector, which comes in
handy when you are using multiple projectors. The projector name you assign is displayed
in the following locations.
• In the “Projector Name” box of the Wireless “Standing by for connection...” message
• In the “Projector Name” box of the Wireless Connection data window (page 68)
• In the “Projector Name” box of the Wireless Connection window (page 54)
• In the “Projector Name” box of the Connection dialog box (page 60)
To assign a name to a Data Projector
1
Perform the procedure under “To display and log into the Web Setup page”
(page 65) to display the Web Setup top page.
2
In the “Projector Setup” area, click the [Edit] button.
z This will display a projector setup page.
3
Enter up to 12 characters for the name into the “Projector Name” box.
4
Click the [Save] button.
Note
You also can use the projector setup page to define a connection keyword (see next
page).
