E-5
Playing with Different Tones
406A-E-007A
Selecting and Playing a Tone
The piano comes with 11 built-in tones.
• The names of the tones are marked above the
keyboard keys to which they are assigned.
• The GRAND PIANO tone was recorded with stereo
sampling.
To select a tone
1
Press the POWER button.
2
Select the tone you want.
● To select GRAND PIANO
Press the GRAND PIANO button.
● To select one of the other tones
• While holding down the FUNCTION button,
press the keyboard key that corresponds to
the tone you want to select.
• You can also select a tone by holding down
the FUNCTION button and pressing the
GRAND PIANO button. Each press of the
GRAND PIANO button cycles through the
tone settings in sequence from 1 through
A as shown in the illustration.
* A note does not sound when you press a
keyboard key while holding down the
FUNCTION button.
3
Use the VOLUME knob to adjust the
volume.
NOTE
• Changing the tone selection causes DSP* to switch
automatically to the default setting for the newly
selected tone. This causes any notes that are
sounding at the time of the change to be interrupted
momentarily. The DSP* will be set to the default
setting for the newly selected tone when the note
resumes. (*See page E-7)
Adjusting the Brilliance of a Tone
You can adjust the clarity and sharpness of a tone to
suit your music and personal preferences.
1
While holding down the FUNCTION
button, use the keyboard keys shown below
to adjust the brilliance of a tone to the level
that you want.
̄ : produces a more mellow sound
̆ : produces a brighter sound
• To return the brilliance setting to its initial
default, hold down the FUNCTION button and
press both of the keyboard keys [̄] and [̆] at
the same time.
1
GRAND PIANO
3
ELEC PIANO 1
2
GRAND PIANO 2
8
PERC ORGAN
4
ELEC PIANO 2
9
STRINGS
7
PIPE ORGAN
5
HARPSICHORD
6
VIBRAPHONE
A
RIDE ACO BASS
>
ACOUSTIC BASS
A0 B0 C1 D1 E1
B
0 E
1
F1 G1
G
1C
1
Tone Keys
▲
C
1
▲
C
2
▲
C
3
▲
C
4
▲
C
5
▲
C
6
▲
C
7
▲
C
8
