6-2
4 1(EXE) or w
hw(Value of A)
S when A = 7
w
V when A = 7
ww
baw
S when A = 10
w
V when A = 10
ww
bfw
S when A = 15
w*
1
V when A = 15
*
1
Pressing w while the program’s final result is on the display exits the program.
u Running an Existing Program
1. On the Main Menu or the RUN • MAT mode screen, press 0.
• This will display a Program List like the one shown
nearby.
2. Use c and f to move the highlighting to the name of the program you want to run.
3. Press 1(EXE) or w.
• This runs the program.
• Pressing w while a program’s final calculation result is displayed re-runs the program.
Note
• In the RUN • MAT mode, you can also run a program by directly specifying the program file
name using the syntax below.
Prog "<file name>". An error will occur if the calculator is unable to find a program with the
file name you specified.
• Even if you run a program by inputting its program name as described above, pressing w
while the program’s final calculation result is displayed will re-run the program.
u Re-running Program You Recently Ran
1. While the Program List is displayed, press e.
• This displays a recently run program log, which can
display up to six programs.
