OTHER RECORDING FUNCTIONS
87
Using Continuous Shutter
In addition to normal recording that records a single image
each time the shutter button is pressed, you can select one
of the three continuous shutter modes to record multiple
images.
• Normal-speed continuous shutter
You can continually record images until memory becomes
full.
• High-speed continuous shutter
Record up to three consecutive images at high speed.
• Flash continuous shutter
Use this mode to record up to three consecutive images,
firing the flash for each one.
1.
In the REC mode, press [MENU].
2.
Select the “REC” tab, select “Continuous”,
and then press [̈].
3.
Use [̆] and [̄] to
select “Normal
Speed”, “High
Speed”, or “Flash
Cont. ”, and then
press [SET].
• This causes the
applicable icon to
appear on the monitor
screen.
: Normal-speed continuous shutter
: High-speed continuous shutter
: Flash continuous shutter
• With “Off”, snapshots are recorded one at a time.
IMPORTANT!
• Turning off the camera automatically turns off the
continuous shutter mode.
