A SERVICE OF

logo

Open as PDF
next previous
20060301
k
Toolbar Button
The operation described below is available from the toolbar only.
8-1-6
Geometry Application Overview
Activate Toggle Select (page 8-3-2)
Tap i and then tap a figure.
Do this:
To do this:
Tapping a button highlights it, indicating that the button’s function is turned on.
k
About the Measurement Box
Tapping the
u
button to the right of the toolbar takes you to the measurement box. Tap
t
to
return to the normal toolbar.
Normal toolbar Measurement box
For more information about the measurement box, see “Using the Measurement Box” on
page 8-3-6.
k
About the Geometry Format Dialog Box
Settings for the Geometry application can be configured on the Geometry Format dialog
box which appears when you tap
O
and then [Geometry Format]. See “1-9 Configuring
Application Format Settings” for more information.