116
OTHER RECORDING FUNCTIONS
4.
Use [̇] and [̈] to
display the image
whose setup you
want to register as a
BESTSHOT scene.
5.
Use [̆] and [̄] to
select “Save”, and
then press [SET].
• This registers the setup.
• Now you can use the
procedure on page 114
to select your user
setup for recording.
IMPORTANT!
• BESTSHOT user setups are located in the camera’s
built-in memory after the built-in sample scenes.
• Note that formatting the built-in memory (page 198)
deletes all BESTSHOT user setups.
NOTE
• The following are the settings that are included in a
BESTSHOT mode user setup: focus mode, EV shift
value, filter, metering mode, white balance mode,
flash intensity, sharpness, saturation, contrast, flash
mode, ISO sensitivity, Flash Assist, aperture and
shutter speed.
• Note that images recorded with this camera only can
be used to create a BESTSHOT user setup.
• You can have up to 999 BESTSHOT user setups in
the camera’s built-in memory at one time.
• You can check the current setup of a scene by
displaying the various setting menus.
• When you register a BESTSHOT user setup, it is
automatically assigned a file name using the format
“UP700nnn.JPE” (n=0 to 9).
