Recording With Manual Exposure
Adjustment
When adjusting the exposure manually:
1. Set the camcorder’s programmed AE mode to
Manual or Av ( I ).
2. Use the camcorder’s exposure functions (e.g. the
IRIS/SELECT wheel) to adjust the exposure as
desired
( J ).
Cautions
●
You cannot operate the zoom using the camcorder’s
zoom lever.
●
If you zoom in or out, you may need to adjust the
focus once more.
●
Certain EF lenses may be difficult to focus manually,
but using the monitor as a guide you will still be able
to adjust the focus in most cases.
●
This adapter cannot be used with the Canon
Extender XL.
●
We do not recommend use of EF 2×/EF 1.4× lenses
with this adapter as they are difficult to focus
manually, but using the monitor as a guide, you will
still be able to adjust the focus in most cases.
●
If you attach an EF lens with a wider aperture than
f/1.6, there will be no benefit from apertures smaller
than f/1.6.
●
If you use a lens that is fitted with an image
stabilization system the stabilization will be effective,
but not to the same extent as an XL lens.
Adjusting the Exposure
* When the camcorder is set to Tv (shutter-priority)
mode, even when you change the shutter speed, the
camera can adjust the exposure automatically.
