NetworkSetting(Windows)
SpecifyingthePrinter’sFrameType
Toenablecommunicationbetweentheprinterandcomputersonyournetwork,specifytheEthernetframe
typeinyourNetWareenvironment.
FollowthesestepstospecifytheframetypebyusingimagePROGRAFDeviceSetupUtilityortheprinter
ControlPanel.
Note
•YoucanspecifytheframetypebyusingRemoteUIiftheprinter’sIPaddressiscongured.
Important
•Beforespecifyingtheframetype,makesuretheprinterisonandconnectedtothenetwork.
•ForinstructionsoninstallingimagePROGRAFDeviceSetupUtility,see“InstallingimagePROGRAF
DeviceSetupUtility”.(→P.452)
SpecifyingtheframetypeusingimagePROGRAFDeviceSetupUtility
1.StartimagePROGRAFDeviceSetupUtility.
2.Inthelistofprinters,selecttheprintertocongure.
3.ChooseProtocolSettingsfromthePrintermenu.
4.ClicktheNetWaretabandselecttheframetypeintheNetWareFrameTypelist.
5.ClicktheIPv4tabandselectETHERNETIIintheFrameTypelist.
6.InIPAddress,entertheIPaddressassignedtotheprinter,andthenenterthesubnetmaskin
SubnetMaskandthedefaultgatewayinGatewayAddress.
Important
•YoumustspecifytheIPaddressheretobeabletocongureNetWareprotocolsettingsusing
RemoteUI.
7.ClickSet.
8.ClickOKaftertheConrmationmessageisdisplayed.
9.ExitimagePROGRAFDeviceSetupUtility.
586NetworkSetting
