BEFORE EMBROIDERING
Getting Ready
Basic operations B-65
B
1
■ Removing the Embroidery Unit
a
Press either or , then press
.
→ The carriage will move to the removal position.
b
Turn the main power to OFF.
c
Hold down the release button, and pull the
embroidery unit away from the machine.
a Release button
• Always remove the embroidery frame before
pressing . Otherwise, the frame may
strike the embroidery foot, and possibly cause
injury.
• The embroidery unit will not fit in the storage
case if this step is not done.
• Be sure to turn off the machine before
removing the embroidery unit, otherwise
damage to the machine may result.
• Do not carry the embroidery unit by holding
the release button compartment.
