NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
15
No. Part Name
Part Code
U.S.A./
Canada
Others
1 Buttonhole foot “A” X57789-151
2 Overcasting foot “G” XC3098-051
3 Monogramming foot “N” X53840-351
4 Zipper foot “I” X59370-051
5 Zigzag foot “J” (on machine) XC3021-051
6 Blind stitch foot “R” X56409-051
7 Button fitting foot “M” 130489-001
8 Free-motion quilting foot “C” XE0765-001
9 Free-motion open toe quilting
foot “O”
XE0767-001
10 Free-motion echo quilting foot
“E”
XE0766-001
11 Walking foot SA140 F033N:XC2214-102
12 1/4” quilting foot with guide SA185 F057:XC7416-252
13 Straight stitch foot XD0826-051
14 Quilting guide SA132 F016N:XC2215-002
15 Straight stitch needle plate XC8362-051
16
Cord guide bobbin cover
(with single hole)
XC8449-051
17 Spool stand XE0774-001
18 Seam ripper X54243-051
19 Bobbin × 10 SA156 SFB:XA5539-151
20 Needle set X58358-051
21 Twin Needle X59296-151
22 Cleaning brush X59476-051
23 Eyelet punch 135793-001
24 Screwdriver (large) XC8349-051
25 Screwdriver (small) X55468-051
26 Spool cap (small) × 2 130013-154
27
Spool cap (medium) × 2
One is on the machine.
X55260-153
28 Spool cap (large) × 2 130012-054
29 Spool felt X57045-051
30 Disc-shaped screwdriver XC1074-051
31 Spool net XA5523-050
32 Foot controller
XD0501-051 (EU area)
XC8816-051 (other area)
33 Grid sheet set SA507 GS3:X81277-150
34 Touch pen (stylus) XA9940-051
35 Knee lifter XA6941-052
36 USB cable XD0745-051
37 Operation Manual XE0783-001
38 Quick Reference Guide XE0996-001
39 Wide table XE0802-001
40 Soft cover XE1121-001
Memo
(For U.S.A. only)
Foot controller: Model T
This foot controller can be used with this machine
model QC-1000.
Memo
• For details on using parts 13, 17 and 39, refer to the
enclosed instruction sheet.
• Always use accessories recommended for this
machine.
• The screw for the presser foot holder is available
through your authorized dealer (part code: XA4813-
051).
• This operation manual and the foot controller can be
stored in the soft cover.
