Embroidering 61
2
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Remove the fabric from the embroidery frame,
and cut it out along the cut-out line.
Cut carefully along the stitching and remove
the thread.
• If it is not cut right on the stitching, it will not
be finished neatly.
Stretch the base fabric on the embroidery
frame.
Set up the thread for appliquéing.
Lower the presser foot lever, and press
(Start/stop button).
X The position for the appliqué is stitched, and
the machine stops. "APPLIQUE" will be
displayed on the screen.
a Appliqué position
b Base fabric
Apply a thin layer of fabric glue or spray
adhesive to the back of the appliqué piece, and
attach it in the appliqué position.
Lower the presser foot lever, and press
(Start/stop button).
X The position for the appliqué is stitched, and
the machine stops.
Memo
z When "APPLIQUE MATERIAL", "APPLIQUE
POSITION" and "APPLIQUE" are displayed,
a specific color thread does not appear. Use
a proper color thread to match the appliqué
piece.
Follow the instructions on the screen, and
change thread colors as you embroider.
a
b
