A SERVICE OF

logo

Open as PDF
next previous
Chapter 1 Preparation of Embroidery Machine
BES-941BC • BES-1241BC
44
Sash frame (optional)
Attaching the sash frame
1. Set the table. (Refer to "3-4 Mounting of Table" (Page 26) for details.)
2. Mount two vertical sash frames q on the holder base frames L and R, and two horizontal
sash frames w on the X-axis feed frame e and the holder base frame C r, using the screws.
3. Set the material. Then, set ten sash clips 290 t horizontally on the upper and lower sides,
four sash clips 220 y vertically on the left and right sides, and two sash clips 220 y
horizontally on the upper and lower sides.
q
e
w
q
r
t
y
t
e
e
y