5. USING THE OPERATION PANEL (BASIC OPERATIONS)
28
BAS-311H
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
5-1. Name and function of each operation panel item
(1) Power indicator
Illuminates when the power is turned on.
(2) CAUTION indicator
Illuminates when an error occurs.
(3) RESET key
Used to reset errors.
(4) TEST key
Used to switch to test mode, or it can be used in combination with other keys to switch to other setting modes.
(5) TEST indicator
Illuminates when the TEST key (4) has been pressed.
(6) THREAD/CLAMP key
Used to start threading mode or work clamp height setting mode.
(7) THREAD/CLAMP indicator
Illuminates when the THREAD/CLAMP key (6) has been pressed.
(8) X-SCALE indicator
Illuminates when the SELECT key (14) is pressed to switch to the X-scale setting.
(9) Y-SCALE indicator
Illuminates when the SELECT key (14) is pressed to switch to the Y-scale setting.
(10) SPEED indicator
Illuminates when the SELECT key (14) is pressed to switch to the sewing speed setting.
(11) COUNTER indicator
Illuminates when the SELECT key (14) is pressed to switch to the lower thread or production counter setting.
3070B
