Cleaning
Always pull the plug before you clean the
appliance. Except the base 1, all parts can be
cleaned in the dishwasher or by hand with a
commercially available detergent. The steam
accelerator 8 can be removed for cleaning.
Wipe the base 1 with a damp cloth.
Decalcifying
After you have used your steamer several
times (depending on the water hardness in
your housing area), the heater 9 in the base 1
is covered by a layer. The appliance should
now be decalcified. Fill the base with white
household vinegar (5 %) so that the heating
element is just covered. Put the steam accele-
rator 8 in place. Close the appliance, connect
it to the mains and set the time to 15 minutes.
Should there still be a layer visible after the
15 minutes are over, repeat the procedure.
After the vinegar and the appliance have suffi-
ciently cooled off empty the base. Rinse the
base 1 3 to 4 times with warm water.
Any remaining calcium can be removed from
the steam accelerator with a brush.
Subject to change without notice.
This product conforms to the EMC-Direc-
tive 89/336/EEC.
At the end of the product's useful life,
please dispose of it at appropriate collec-
tion points provided in your country.
.
14
F20_Korea_10_14 28.06.2005 16:24 Uhr Seite 14
